
SUB8 PRO
The Sub8 PRO is a compact networked active subwoofer with an 8-inch fiber-reinforced paper woofer, a Class D amplifier and onboard DSP. It suits compact monitoring setups, and is also usable in immersive and multichannel systems.
- 8" fiber-reinforced paper woofer, front-ported cabinet
- Frequency response 26 - 300 Hz at -6 dB
- Ethernet control via ADAM Control (AES70 / TCP)
- 4-band parametric EQ and Sonarworks SoundID Reference support
- Analog XLR/TRS and AES3 digital inputs with matching outputs
- Stereo, LFE and Wide operating modes
Fotók
5Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy SUB8 PRO modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Sub8 PRO pairs a high-excursion 8" woofer with a front-firing, front-ported cabinet. The bass port was shaped with finite element analysis, and the amplifier is Class D. Frequency response is 26 - 300 Hz at -6 dB, with a peak output of 105 dB SPL at 1 m.
An onboard Ethernet port gives access to ADAM Control software for Windows and macOS. From there users can set the crossover, time-align the sub with a delay of up to 10 ms, apply four bands of parametric EQ, load Sonarworks SoundID Reference calibration profiles and update firmware. Stereo, LFE and Wide operating modes cover conventional, immersive and full-range work.
The backplate carries 2 x XLR/TRS combi analog inputs and an XLR AES3 digital input. It also has 2 x XLR analog outputs and an XLR AES3 digital output. Level, phase, input selection and bass management can be set on the unit itself. The cabinet is vinyl-wrapped MDF with a painted MDF front panel and a metal grille.
Videó
Műszaki adatok
- Márka
- ADAM Audio
- Modell
- SUB8 PRO
- Kategória
- Stúdió › Stúdiómonitorok
Inputs
- Analog inputs
- 2 x XLR / TRS combi
- Digital input
- XLR AES3
- Analog input impedance
- 25 kOhm
- Digital input impedance
- 110 Ohm
- Max. input level
- +19 dBu
Outputs
- Analog outputs
- 2 x XLR
- Digital outputs
- XLR AES3
Connectivity
- Networking connector
- RJ45
- Connection type
- Ethernet
- Communication protocol
- AES70 / TCP
- Control software
- ADAM Control (Windows and MacOS available)
Audio
- Frequency response @ -3 dB
- 30 – 228 Hz
- Frequency response @ -6 dB
- 26 – 300 Hz
- Crossover frequencies
- 70, 85, 100, 115 Hz (variable via ADAM Control)
- Max SPL, 50 Hz to 100 Hz average, 3% THD (RMS / Peak)
- 105 dB SPL / 110 dB SPL
- Max SPL, 25 Hz to 50 Hz average, 10% THD (RMS / Peak)
- 101 dB SPL / 104 dB SPL
- Max peak SPL, IEC-weighted noise (full range)
- 112 dB SPL
- Peak amplifier power (10% THD, limiter deactivated)
- 325 W
- RMS amplifier power (1% THD, limiter deactivated)
- 200 W @ 3 Ohm
- Amplifier type
- PWM
Driver
- Basket diameter
- 8″
- Voice coil diameter
- 1 3/8″ (35 mm)
- Cone material
- Paper, fiber-reinforced
Signal processing
- AD converter
- 24-bit (via XLR/TRS inputs)
- Internal sample rate
- 96 kHz
- Delay range and resolution
- 0 – 10 ms, 32-bit
- Room adaptation
- 4-bands QEQ
Controls
- Level
- -18 dB to +6 dB
- Input selection
- Analog, digital
- Bass management
- 70, 85, 100, 115 Hz
- Operational modes
- Remote Control, Local / Stereo, LFE (<120Hz), Wide
Power
- AC input voltage
- 100 – 240 V, 50/60 Hz
- Power consumption (max, standby)
- 400 W, 2.5 W
Physical
- Cabinet design
- Front fire and front ported
- Cabinet material
- Vinyl wrapped MDF and painted MDF front panel
- Weight
- 15.3 kg (33 lbs 12 oz)
- Dimensions (H x W x D)
- 385 mm x 300 mm x 365 mm (15 1/8″ x 11 6/8″ x 14 3/8″)
- Operating conditions
- -10° C to +40° C (+14° F to +104° F); <75% RH, non-condensing
In the box
- Delivery contents
- Sub8 PRO subwoofer, power cable, Quick Start Guide
- Warranty
- 5 years (2 years warranty plus 3 years optional with product registration)