SUB10 PRO
The Sub10 PRO is a compact active subwoofer with a 10-inch fiber-reinforced paper woofer, Class D amplification and DSP, made for stereo, LFE and wide-range monitoring setups in studios. It supports room calibration through ADAM Control and Sonarworks SoundID Reference.
- 10" fiber-reinforced paper woofer, Class D amplifier
- Frequency response 21 – 300 Hz at -6 dB
- Max peak SPL 113 dB with IEC-weighted noise (full range)
- Stereo, LFE and Wide operating modes
- AES3 digital plus XLR/TRS analog I/O, Ethernet control
- ADAM Control and Sonarworks SoundID Reference calibration
Photos
5Listings
No listings of this model yet
When someone sells a SUB10 PRO, the listings and the sales history will show here.
Sell one like thisDescription
The Sub10 PRO is a front-fired, front-ported active subwoofer built around a high-excursion 10-inch woofer with a fiber-reinforced paper cone. A Class D amplifier and onboard DSP drive it, and the bass port was shaped using finite element analysis to keep distortion low at high levels. The cabinet is vinyl-wrapped MDF with a painted MDF front panel and a metal grille.
Three operating modes (Stereo, LFE and Wide) allow use in conventional 2.1 systems, immersive and multichannel setups, or full-range applications. The backplate offers level, phase and bass management controls, input selection, and a footswitch/TRS bypass. Over the network, ADAM Control provides 4-band parametric EQ, adjustable crossover and delay, and loads Sonarworks SoundID Reference calibration profiles and firmware updates.
Connections are 2 x XLR/TRS combi analog inputs, an AES3 digital input, 2 x XLR analog outputs, an AES3 digital output and an RJ45 Ethernet port using AES70 over TCP. The warranty is 2 years, extendable to 5 years with product registration.
Video
Specifications
- Brand
- ADAM Audio
- Model
- SUB10 PRO
- Category
- Studio › Studio monitors
Audio Connectors
- Analog inputs
- 2 x XLR / TRS combi
- Digital input
- XLR AES3
- Analog input impedance
- 25 kOhm
- Digital input impedance
- 110 Ohm
- Max. input level
- +19 dBu
- Analog outputs
- 2 x XLR
- Digital outputs
- XLR AES3
Connectivity
- Networking connector
- RJ45
- Connection type
- Ethernet
- Communication protocol
- AES70 / TCP
- Control software
- ADAM Control (Windows and MacOS available)
- Third-party calibration
- Sonarworks SoundID Reference
Acoustics
- Frequency response @ -3 dB
- 22 – 264 Hz
- Frequency response @ -6 dB
- 21 – 300 Hz
- Crossover frequencies
- 70, 85, 100, 115 Hz (variable via ADAM Control)
- Max peak SPL, IEC-weighted noise (full range)
- 113 dB SPL
- Max peak SPL, IEC-weighted noise (85 Hz bass managed)
- 114 dB SPL
- Max SPL 50–100 Hz avg @ 3% THD (RMS / Peak)
- 106 dB SPL / 110 dB SPL
Driver and Amplification
- Basket diameter
- 10″
- Voice coil diameter
- 1 3/4″ (45 mm)
- Cone material
- Paper, fiber-reinforced
- Amplifier type
- PWM
- RMS (1% THD, limiter deactivated)
- 200 W @ 3 Ohm
- Peak (10% THD, limiter deactivated)
- 325 W
Signal Processing
- AD converter
- 24-bit (via XLR/TRS inputs)
- Internal sample rate
- 96 kHz
- Delay range and resolution
- 0 – 10 ms, 32-bit
- Advanced room adaptation
- 4-bands QEQ
Backplate Controls
- Level
- -18 dB to +6 dB
- Input selection
- Analog, digital
- Bass management
- 70, 85, 100, 115 Hz
- Operational modes
- Remote Control, Local / Stereo, LFE (<120Hz), Wide
- Bypass
- Yes, via footswitch (not included) and TRS connection (latched)
Power
- Power consumption (max, standby)
- 450 W, 2.5 W
- AC input voltage
- 100 – 240 V, 50/60 Hz
Physical
- Cabinet design
- Front Fire and front ported
- Cabinet material
- Vinyl wrapped MDF and painted MDF front panel
- Dimensions (H x W x D)
- 450 mm x 360 mm x 450 mm (17 3/4″ x 14 1/8″ x 17 3/4″)
- Weight
- 22.8 kg (50 lbs 4 oz)
- Operating conditions
- -10° C to +40° C; <75% RH, non-condensing
- Warranty
- 5 years (2 years plus 3 years optional with product registration)
In the box
- Delivery contents
- Sub10 PRO subwoofer, power cable, Quick Start Guide