S7A MK2
Four-way active main studio monitor with two 15" woofers, two 9" cone midranges, two X-ART midrange units and an X-ART tweeter, built for large control rooms and film studios. Total onboard amplification is 2750 W RMS, and the cabinet can be flush-mounted in a wall.
- 4-way design: 2 x 15" woofers, 2 x 9" midranges, 2 x X-ART mids, X-ART tweeter
- 2750 W RMS / 3850 W music onboard PWM amplification
- Frequency response 20 Hz - 50 kHz; crossovers 65 / 800 / 3100 Hz
- Max SPL per pair at 1 m: ≥138 dB
- Switchable Dolby X-Curve filter and 3 parametric EQs
- Front/rear switchable XLR input; flush wall mounting possible
Zdjęcia
7Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi S7A MK2, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The S7A MK2 is the larger sibling of the S6X. Seven drivers are arranged in a horizontally symmetrical, extended D'Appolito layout, which gives consistent horizontal coverage and tighter vertical dispersion, so reflections from the ceiling, floor and mixing console are reduced. All drivers sit on Alucore panels with an aluminium honeycomb core to improve mechanical coupling to the cabinet.
Each driver group has its own PWM amplifier. The low heat output allows the cabinet to be mounted flush in a studio wall, with heat leaving through the front. The control panel offers a ±10 dB input sensitivity adjustment, four further level controls for individual amplifier modules, high and low shelving filters and three parametric equalizers that can be engaged separately or grouped. A switchable Dolby X-Curve filter (3 dB per octave roll-off from 2 kHz, based on ISO 2969) supports film mixing.
Signal connects over balanced analog XLR. A front-panel XLR input can be switched with the rear input, so the monitor can be used regardless of the set-up. A pair reaches peak levels of at least 138 dB SPL at 1 m, with response down to 20 Hz.
Wideo
Specyfikacja
- Marka
- ADAM Audio
- Model
- S7A MK2
- Kategoria
- Studio › Monitory studyjne
Drivers
- Woofers
- 2 x 15" (380 mm) basket, 4" (100 mm) voice coil, paper cone
- Midrange (cone)
- 2 x 9" (228 mm) basket, 2" (50 mm) voice coil, HexaCone
- Midrange (X-ART)
- 2 x X-ART, 26 inch² (16800 mm²) diaphragm area each
- Midrange diaphragm weight
- 0.7 g
- Tweeter
- 1 x X-ART, 4 inch² (2420 mm²) diaphragm area
- Tweeter diaphragm weight
- 0.17 g
Amplification
- Amplifier type
- PWM
- Total power RMS / Music
- 2750 W / 3850 W
- Woofer amp (1)
- 1000 W RMS / 1400 W Music
- Woofer amp (2)
- 500 W RMS / 700 W Music
- Tweeter amp
- 250 W RMS / 350 W Music
Audio
- Frequency response
- 20 Hz - 50 kHz
- Max. SPL per pair at 1 m
- ≥138 dB
- Max. SPL, sine wave 100 Hz to 3 kHz at 1 m
- ≥128 dB
- THD 90 dB / 1 m > 100 Hz
- ≤0.5 %
- Crossover frequencies
- 65 / 800 / 3100 Hz
Controls
- Input sensitivity
- ±10 dB
- Parametric EQ
- 3 x, Q 0.2 - 20 / 20 - 200 Hz / ±12 dB
- High shelf EQ > 6 kHz
- ±6 dB
- Low shelf EQ < 150 Hz
- ±6 dB
- Sub gain
- ±4 dB
- Mid-woofer level
- ±2 dB
- Mid level
- ±2 dB
- Tweeter gain
- ±4 dB
- X-Curve filter
- Yes
Inputs
- Analog input
- XLR
- Input location
- Front / Rear switchable
- Input impedance
- 10 kOhm
Physical
- Dimensions (H x W x D)
- 35.5" (900 mm) x 47" (1200 mm) x 26.5" (670 mm)
- Weight
- 575.4 lb (261 kg)
- Magnetically shielded
- No
- Control panel position
- Front
Warranty
- Warranty
- 5 years (2 years plus 3 years optional with product registration)
In the box
- Delivery contents
- Power cord, manual