S6X
The S6X is an active four-way main studio monitor with seven drivers in a symmetrical, extended D'Appolito layout. It is aimed at large control rooms and film or sound studios that need high output with a controlled vertical dispersion.
- Active 4-way main monitor with 7 drivers
- 2 x 12" and 2 x 7.5" HexaCone woofers, 2 x X-ART mids, X-ART tweeter
- 2250 W RMS total from built-in PWM amplifiers
- Frequency response 23 Hz - 50 kHz
- Max. SPL per pair at 1 m ≥133 dB
- Shelving filters and 3 parametric EQs on front panel
Fotografije
5Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao S6X, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The S6X is a self-powered main monitor built around a horizontally symmetrical array of seven drivers: two 12" woofers, two 7.5" cone midrange drivers, two X-ART midrange units and one X-ART tweeter. The layout is intended to give consistent horizontal coverage while narrowing vertical dispersion, which reduces early reflections from the ceiling, floor and mixing console. All drivers are mounted on Alucore aluminum-honeycomb panels to improve coupling between the drivers and the cabinet.
Each driver has its own built-in PWM amplifier: 500 W RMS for each woofer and 250 W RMS for each of the other bands, giving 2250 W RMS in total. Frequency response is stated as 23 Hz to 50 kHz, with a maximum peak level of at least 133 dB per pair at 1 m. The bass-reflex ports are on the front.
The front panel carries input sensitivity (±10 dB), individual level controls for the sub, mid-woofer, mid and tweeter bands, low and high shelving filters, and three fully parametric EQs for dealing with room modes. The EQs can be switched in separately or as a group. The only input is an analog balanced XLR.
Specifikacije
- Marka
- ADAM Audio
- Model
- S6X
- Kategorija
- Studio › Studijski monitori
Drivers
- Woofers
- 2 x 12" (305 mm), HexaCone
- Woofer voice coil
- 3" (75 mm)
- Midrange (cone)
- 2 x 7.5" (186 mm), HexaCone
- Midrange (cone) voice coil
- 2" (50 mm)
- Midrange (X-ART)
- 2, diaphragm area 2 x 26 inch² (16800 mm²)
- Tweeter
- 1 x X-ART, diaphragm area 4 inch² (2420 mm²)
Amplification
- Amplifier type
- PWM
- Woofer amps
- 2 x 500 W RMS / 700 W music
- Midrange (cone) amps
- 2 x 250 W RMS / 350 W music
- Midrange amps
- 2 x 250 W RMS / 350 W music
- Tweeter amp
- 1 x 250 W RMS / 350 W music
- Total amp power RMS / music
- 2250 W / 3150 W
Audio
- Frequency response
- 23 Hz - 50 kHz
- Max. SPL per pair at 1 m
- ≥133 dB
- Max. SPL, sine wave 100 Hz to 3 kHz at 1 m
- ≥123 dB
- THD 90 dB / 1 m > 100 Hz
- ≤0.5 %
- Crossover frequencies
- 85 / 800 / 3100 Hz
Inputs
- Analog input
- XLR
- Input impedance
- 10 kOhm
Controls
- Input sensitivity
- ±10 dB
- Parametric EQ
- 3 x, Q 0.2 - 20 / 20 - 200 Hz / ±12 dB
- High shelf EQ
- > 6 kHz, ±6 dB
- Low shelf EQ
- < 150 Hz, ±6 dB
- Sub gain
- ±4 dB
- Tweeter gain
- ±4 dB
- Mid-woofer / mid level
- ±2 dB each
- X-Curve filter
- Yes
Physical
- Height x Width x Depth
- 28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
- Weight
- 213.8 lb (97 kg)
- Control panel position
- Front
- Magnetically shielded
- No
Warranty
- Warranty
- 5 years (2 years plus 3 years optional with product registration)
In the box
- Delivery contents
- Power cord, manual