A8H
The A8H is a 3-way active midfield studio monitor with an 8-inch woofer, a 3.5-inch midrange driver and an X-ART tweeter on a rotatable waveguide. It suits critical listening, mixing and mastering in mid- to full-sized rooms.
- 3-way active midfield monitor, 8" woofer, 3.5" midrange, X-ART tweeter
- Frequency response 31 Hz – 45 kHz (-6 dB)
- Max peak SPL 105 dB per speaker at 1 m (sine bursts)
- Rotatable HPS waveguide, 120° x 70° dispersion
- XLR and RCA inputs; RJ45 network control via A Control
- Sold as left or right version; 13.6 kg each
Bilder
5Annonser
Ingen annonser for denne modellen ennå
Når noen selger en A8H, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The A8H is the top model of the A Series and uses three drivers: an 8-inch Multi-Layer Mineral woofer, a 3.5-inch Dome Cone Hybrid midrange and an X-ART tweeter behind a rotatable HPS waveguide. Each driver has its own amplifier, with a PWM design for the woofer and Class A/B for the midrange and tweeter. Crossover points are at 400 Hz and 3.0 kHz. The monitor is sold as a left or right version.
Onboard DSP provides two voicings (Pure and UNR) and four bands of backplate room adaptation: Bass, Desk, Presence and Treble. Through the network port, the A Control software for Windows and macOS gives remote access to extended adaptation with 6 parametric EQ bands, level and delay, and can import Sonarworks SoundID Reference calibrations.
Audio comes in over balanced XLR or unbalanced RCA. The cabinet is front ported, with four M8 threaded inserts on the bottom for mounting, and a front LED shows status.
Video
Spesifikasjoner
- Merke
- ADAM Audio
- Modell
- A8H
- Kategori
- Studio › Studiomonitorer
Acoustics
- Frequency response (-3 dB)
- 34 Hz – 41 kHz
- Frequency response (-6 dB)
- 31 Hz – 45 kHz
- Crossover frequencies
- 400 Hz, 3.0 kHz
- Max peak SPL per speaker at 1 m (sine bursts)
- 105 dB SPL
- Max peak SPL per speaker at 1 m (IEC-weighted noise)
- 116 dB SPL
- Dolby DARDT max SPL in full space
- 117 dB SPL
Drivers
- Woofer
- 8" (voice coil 1.5" / 38 mm), MLM cone
- Midrange
- 3.5" Dome Cone Hybrid (DCH), voice coil 1.3" / 33 mm, MLM cone
- Tweeter
- X-ART, diaphragm area 4 inch² (2420 mm²)
- Waveguide
- HPS (rotatable)
- Waveguide dispersion
- 120° horizontal, 70° vertical
Amplification
- Woofer amplifier
- PWM, 250 W peak / 200 W RMS
- Midrange amplifier
- Class A/B, 70 W peak / 55 W RMS
- Tweeter amplifier
- Class A/B, 20 W peak / 15 W RMS
- Total peak amplifier power
- 340 W
Inputs
- Analog inputs
- XLR, RCA
- Input impedance
- 9 kOhm / 3.3 kOhm
- Max. input level
- +19 dBu
- Input sensitivity
- 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting
Connectivity
- Network connector
- RJ45 (Ethernet)
- Protocol
- OCA using standard IP data
- Control software
- A Control (Windows and macOS)
Audio
- AD converter
- 24-bit
- Internal sample rate
- 96 kHz
- Delay range, resolution
- 0 – 10 ms, 0.1 ms
- Voicings
- Pure, UNR
- Level control
- -12 dB to +12 dB
- Advanced room adaptation
- 6 x PEQ, Level, Delay
Power
- AC input voltage
- 100 – 240 V, 50/60 Hz
- Power consumption (max, idle, sleep)
- 220 W, 15 W, 3.5 W
Physical
- Cabinet design
- Single front ported
- Cabinet material
- Vinyl wrapped MDF, painted MDF front panel
- Mounting
- 4 x M8 threaded inserts on the bottom
- Dimensions (H x W x D)
- 274 mm x 382 mm x 329 mm (10 3/4" x 15" x 13")
- Weight
- 13.6 kg (30 lb)
- Operating conditions
- -10° C to +40° C; <75 % RH, non-condensing
In the box
- Contents
- A8H loudspeaker, power cable, Quick Start Guide
- Warranty
- 5 years (2 years plus 3 years optional with product registration)