A3X
Compact two-way active nearfield studio monitor with a 4.5-inch carbon fiber woofer and an X-ART folded-diaphragm tweeter. It suits small or mobile studios and desktop DAW setups.
- Vertical 2-way active nearfield monitor
- 4.5" carbon fiber woofer with X-ART tweeter
- 50 W RMS / 80 W music total amplifier power
- 60 Hz – 50 kHz frequency response
- XLR and RCA inputs with Stereolink function
- Tweeter gain control of ±4 dB
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi A3X, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The A3X is the smallest monitor in the AX Series. It is a vertical two-way active design with a 4.5" carbon fiber woofer and an X-ART tweeter, each driven by its own built-in A/B amplifier (25 W RMS / 40 W music per driver). The stated frequency response is 60 Hz to 50 kHz, with a maximum SPL of at least 106 dB per pair at 1 m.
The front panel carries the volume control and the on/off switch. A tweeter gain control of ±4 dB lets the user adapt the sound to the room. A Stereolink function uses a second pair of input and output jacks, so the volume of both monitors can be set from one speaker. Each monitor can act as master or slave, and a Cinch cable for the link is supplied.
Signals connect through analog XLR and RCA inputs. The cabinet is small, with a geometry meant to reduce reflections and vertical sound radiation meant to reduce early reflections from desks and consoles. Optional wall mount and desktop stand are available. Warranty is 2 years, extendable to 5 years with product registration.
Wideo
Specyfikacja
- Marka
- ADAM Audio
- Model
- A3X
- Kategoria
- Studio › Monitory studyjne
Woofer
- Number
- 1
- Basket Ø
- 4.5" (120 mm)
- Voice coil Ø
- 1" (25 mm)
- Cone material
- Carbon Fiber
Tweeter
- Number
- 1
- Type
- X-ART
- Diaphragm area
- 4 inch² (2420 mm²)
- Equivalent diaphragm Ø
- 2" (56 mm)
- Velocity transform ratio
- 4:1
- Diaphragm weight
- 0.17 g
Built-in amplifiers
- Woofer amp type
- A/B
- Woofer amp power RMS / Music
- 25 W / 40 W
- Tweeter amp type
- A/B
- Tweeter amp power RMS / Music
- 25 W / 40 W
Inputs
- Analog inputs
- XLR / RCA
- Input impedance
- 10 kOhm
- Input sensitivity
- -∞ to +14 dB
- Stereolink
- Yes
Controls
- Tweeter gain
- ±4 dB
- Control panel
- Front
Audio
- Frequency response
- 60 Hz - 50 kHz
- THD 90 dB / 1 m > 100 Hz
- ≤0.8 %
- Max. SPL, sine wave 100 Hz to 3 kHz at 1 m
- ≥98 dB
- Max. SPL per pair at 1 m
- ≥106 dB
- Crossover frequency
- 2800 Hz
Physical
- Height x Width x Depth
- 10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
- Weight
- 10.1 lb (4.6 kg)
- Magnetically shielded
- No
In the box
- Delivery contents
- Cinch-cable, power cord, manual
- Warranty
- 5 years (2 years warranty plus 3 years optional with product registration)